Cortado Server – Manual


18 views January 21, 2019 December 19, 2019 0

Create Wi-Fi profile for Android Enterprise

In the Wi-Fi profile, you can set up your Wi-Fi connection and assign it to the users. Now the users don’t need to log on as the wireless network will be recognised.

  • Select Wi-Fi as the profile that you want to add. The following dia­log will open:
Configure Wi-Fi profile for Android Enterprise

Configure Wi-Fi profile for Android Enterprise

Make the following settings:

  • Profile name: Enter a name for the profile here.
  • Service Set Identifier (SSID): Enter the network name or device number (SSID) of the Wi-Fi hotspot here.
  • Pre-shared key: Enter the Wi-Fi password here. Then the user will not have to enter the password to access the wireless network.
  • Enable Auto Join if, after authenticating himself once, the user is always con­nected automatically to the wireless network provided here.
  • Select Hidden Network, if your wireless network is hidden. Then the user has to enter the SSID of the Wi-Fi hotspot to use the wireless network.
  • WEP Key data: When using WEP (Wired Equivalent Privacy), enter the appro­priate WEP key here. You can enter up to four keys. One of these must be set to Default.
  • Key management: Select here the recognized key management schemes.
    • IEEE8021X: IEEE 802.1X using EAP authentication and (optionally) dynam­ically generated WEP keys.
    • NONE: WPA is not used; plaintext or static WEP could be used.
    • WPA EAP: WPA using EAP authentication.
    • WPA PSK: WPA pre-shared key (requires preSharedKey to be specified).
  • Group cipher: Find here a list of recognized Group ciphers.
    • CCMP: AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] TKIP: Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
    • WEP104: WEP104 = WEP with 104-bit key
    • WEP40: WEP40 = WEP with 40-bit key (original 802.11)
  • Protocols: Select here the recognized security protocols.
    • RSN: WPA2/IEEE 802.11i
    • WPA: WPA/IEEE 802.11i/D3.0
  • Authentication algorithm: Select here the recognized IEEE 802.11 authenti­cation algorithms.
    • LEAP: LEAP/Network EAP (only used withLEAP)
    • Open: Open System authentication (required for WPA/WPA2)
    • Shared: Shared Key authentication (required for WEP key)
  • Pairwise ciphers: Select here the recognized pairwise ciphers for WPA.
    • CCMP: AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
    • None: Use only Group keys (deprecated)
    • TKIP: Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
  • Show advanced settings: Enable this checkbox, if your Wi-Fi requires the con­figuration of other settings.

You can now assign this profile to the mobile device users. Note that, to do so, Wi-Fi must be enabled on the device (green dot next to Wi-Fi, in Devices→ Details).

You’ll find out here how to distribute the new profile (see section Assign profile).

Was this helpful?