Cortado Server – Manual

Cellular

12 views January 21, 2019 December 19, 2019 0

Create Cellular profile for iOS

You can create an Access Point Name (APN) for the mobile network here. The APN determines the network path for all mobile network data connections. This usually occurs automatically and is only necessary if you require special access points for the mobile network. Contact your mobile service provider for details.

Note! This option is not available for devices that have been embedded via User Enrollment.

configure cellular profile for iOS

configure cellular profile for iOS

Make the following settings:

  • Profile name: Enter a name for the profile here.
  • Configure APN type: For your profile, select either Default APN, Data APN or both types simultaneously.
  • Default APN:
    • APN name: Enter the name for the access point here.
    • APN authentication type: Select the authentication protocol to be used here (PAP oder CHAP).
    • APN username: Enter the user name for authentication here.
    • APN password: Enter the password for authentication here.
  • Data APN:
    • APN name: Enter the name for the access point here.
    • APN authentication type: Select the authentication protocol to be used here (PAP oder CHAP).
    • APN username: Enter the user name for authentication here.
    • APN password: Enter the password for authentication here.
    • Proxy server and port: Enter the address of your proxy server and the port here.
    • Allowed protocol mask: Select which internet protocols will be supported (IPv4, IPv6 or both).
    • Allowed protocol mask in roaming: Select which internet protocols will be supported when roaming (IPv4, IPv6 or both).
    • Allowed protocol mask in domestic roaming: Select which internet proto­cols will be supported for domestic roaming (IPv4, IPv6 or both).

You’ll find out here how to distribute the new profile (see section Assign profile).

Was this helpful?